Networks

Networks

72 questions · Fundamental Engineering · 51–72

Practice

Which of the following is an appropriate characteristic of IPv6 addresses?

There is a PC whose IP address and subnet mask are shown below. Which of the following is the network address of this PC?

IP address:10.170.70.19Subnet mask:255.255.255.240

Which of the following is an Internet standard that extends the format of email messages to support non-ASCII text as well as audio, video, and images?

Approximately how many seconds is required to transmit a file of 106 bytes via a 64-kbit/s communication line? Here, the transmission efficiency of the line is 80%.

Which of the following is a device that connects multiple LANs by relaying data through the protocol information of the data link layer of the OSI basic reference model?

What is the broadcast address of a network to which the IP address 192.168.57.123/22 belongs?

Which of the following is the device that operates only at the physical layer of the OSI model?

Which of the following is the maximum theoretical data rate (in Mbps) achievable in the IEEE 802.11n network?

Which of the following is an architecture that decouples the network control and forwarding functions, enabling the network control to become directly programmable and the underlying infrastructure to be abstracted for applications and network services?

Which of the following is an e-mail header field that is removed during the message transfer using SMTP?

Which of the following is the network routing and addressing mechanism that is used in IPv6 but not in IPv4?

In an IPv4 network with subnet mask 255.255.255.224, what is the maximum number of host addresses assigned?

Which of the following is a protocol that uses TCP as its transport layer protocol?

In the OSI basic reference model, which of the following is the layer where bridges operate?

Which of the following is an appropriate explanation of SDN (Software-Defined Networking) that uses OpenFlow?

As shown below, multiple PCs are connected to the home network and they have access to the Internet through FTTH, and a global IP address is assigned to the WAN interface of device A. Which of the following is the function of device A that enables the PCs to use the Internet with this global IP address?

Home network (LAN)PCPCHubDevice AONUOptical fiber cable (FTTH)

Which of the following TCP/IP protocols is used to assign IP addresses dynamically?

In a TCP/IP network hierarchical model, what is the name for Equipment A that connects two LAN segments at the Internet Layer?

Application LayerTransport LayerInternet LayerLink LayerInternet LayerLink LayerApplication LayerTransport LayerInternet LayerLink LayerNode 1Equipment ANode 2LAN segment 1LAN segment 2Data flow

Which of the following is a pair of IP addresses belonging to the same subnet, when the subnet mask is 255.255.255.240?

Which of the following delivery models does an ARP response use?

A PC and a web server are communicating via HTTP. When a request packet is sent from the PC to the web server, which of the following combinations of port numbers does the response packet have? Here, the source and the destination port numbers of the request packet are 50001 and 80 respectively.

OptionSource (web server) port numberDestination (PC)port number

Which of the following is an appropriate reason why VLANs are used?